As a music lover, your everyday life is inextricably linked with the headphones, for this I have probably summed up some optimization tips for your headphones. Some of them are very easy, some require some operation on your earphones. Of course, it’s up to you whether to do or not. There is one point that if you fix your headphones, it will not under the maintenance.
Pot Headset (break-in): a pair of new headphones often lack the bass and the harsh voice with a lack of focus, it is because unstability of the drive unit of the electro-acoustic. So I strongly advise you to break-in for 24 to 48 hours in low voiced music before listening. First, play the music in a relative low volumn for several hours. Then, play for another several hours in middle volumn. After that, play for the rest of the time in high volumn. Break-in earphone may improve the earphone driving unit suspension system’s mechanical property, and may cause the coil the winding to be closer. To certain earphones,this kind of change may be box-up.
The earphone’s wearing position: this is very easy to do, but have ever tried to adjust the best position of your earphone? For many earphones, sound field and the balance of sound depend on the location of the drive unit of the earphone fiercely. Scientific research discovery, when before the driving unit relative meatus auditorius’ entrance’s position carries over, underneath we can strengthen to the depth feeling.
Impedance Optimization: the headphone amplifier output is usually directly connected to the speaker output. In order to avoid the damage to the headset and effect, there are amplifier series resistors. The value of the resistance is usually between 200 Au and 600 Au. On the other hand, the headphone output of radio and CD machines are often driven with chips. They have much lower output impedance (less than 50 Au). Generally speaking, the impedance of the headphone is the largest when it is the low-frequency. So the low-frequency attenuation is less than that of the high-frequency. For most headphones, increasing the output impedance makes the sound more mixer darker. Therefore, if your headphones sound shrill, you may consider increasing the effective output impedance of the headphone jack, the simplest method is to add a conversion between the headphones and headphone jack.
Acoustics and mechanical damping: other than the earphones with good design, most of the closed type earphones have heavier coloration than the open type earphones. he specially is the cheap earphone usually does not have any sound absorption damping material, therefore puts a scrap sponge to the ear cabinet to be possible has effective weaken sound wave.
Change line: Have you ever compared the diameter structure of your headphone cable with the really high – quality wire? If so, have you discredited the voice nature of your headphone cable. Headphone cable is generally intended for comfort (weight, mechanical strength, flexibility, not to transmit mechanical noise). Typically, these lines of pure sound quality is very poor. Of course, comfort is the first, if you do not care about comfort, it still has a great return on changing line. These techniques certainly are not complete. No guarantee that can improve the sound quality. But still worth a try.
Related posts:
- Effective Tips to Shop a Headphone for You To music lovers, earphones are of the same importance with...
- Six Questions the Film Buff Should Pay Attention to Music can make people happy. In order to appreciate the...
- Tiptop Headphones – a Feast for the Ears Walking on the street, from time to time you can...
Related posts brought to you by Yet Another Related Posts Plugin.